Gas – Liquid Separators - mist eliminators and droplet separators


 
 


This range of gas-liquid and liquid-liquid separators, gas-liquid distributors and flow equalisers.
for horizontal or vertical vessels offer a solution for a wide variety of separation problems
.

 
     
 
VICO-Chevron

VICO-Tex

Gas – Liquid Separators - mist eliminators and droplet separators.

Costacurta’s quality design and engineering expertise gained over many years involvement in the oil, petrochemical and chemical industries provides a sound basis for selection and process design of an extensive range of droplet separators, mist eliminators and coalescers.

This range of gas-liquid and liquid-liquid separators, gas-liquid distributors and flow equalisers.
for horizontal or vertical vessels offer a solution for a wide variety of separation problems.

Through continued cooperation with university research institutes Costacurta is able to develop fluid-dynamic studies for the optimization of design, sizing and performance.

VICO-Tex® Special mist eliminators, made from layers of mesh specially arranged in a cellular structure usually supplied with support grids for prevention of carry-over in any liquid-gas processing operation to improve performance of distillation columns, vacuum flashers, fractionating towers, absorbers, evaporators, cooling towers and manufactured in a wide variety of materials.

VICO-Vane Droplet separators for horizontal flow installed in horizontal and vertical vessels. These are made with vanes equipped with a variable number of pockets for draining the separated liquid and used for removal of droplets mainly by the inertial impaction mechanism. Used with particularly high gas velocities or when the droplets conveyed by the gas may contain small quantities of suspended solid particles or when they are highly viscous and in cases in where the use of VICO-Tex® is not recommended.

VICO-Chevron Droplet separators for vertical gas flow using parallel moulded vanes with a shape that forces the gas to make a series of changes in direction. The droplets are removed the same way as VICO-Vane. Used to separate large droplets, which may contain small quantities of suspended solid particles, or highly viscous droplets. Normally fitted when the installation of VICO-Tex® or VICO-Vane is not possible or not recommended

VICO-BSA Filter candles comprising cage and coalescent filling are for separating small droplets, down to 0, 3 microns, using inertial impaction mechanism, direct interception and Brownian movement. They must operate with particularly clean vapour streams, so return very high separation efficiencies and suitable for process fluids as used in absorption columns in sulphuric or phosphoric acid plants or downstream of liquid ring compressors or in atmospheric vapour effluent treatment plants

VICO-Spin Axial flow cyclonic droplet separators provide excellent separation by centrifugal force. They are made of a group of elements whose number depends on the working conditions. They work with a high gas velocity enabling the use of smaller vessels at high working pressures and are only slightly affected by any changes in gas flow and clogging caused by solids in the gas stream. Suitable for installation in horizontal or vertical vessels.

vico vane

   
   
   
     
     

© Copyright 2010 - 2013 Kentech SA - Built by Able Apple
| Home | Contact Us | Profile | Straight Wire Mesh Belts | High Temperature Belts | Cooling Freezing Belts | Gas to Liquid Separators | Liquid to Liquid Separators |
Refractory Hexagonal Mesh | Refractory Anchors | Woven Wire Mesh Cloths | Wedge Wire Screens | Filtering Fabricated Parts | High Efficiency Cyclone Separator |
Perforated Plate Screens
| Petrochemical Cyclones | Multi-cell Cyclone Separator | Conidur Fluid Bed Dryers | Conidur Silo Aeration Cones | Conidur Fine Hole Screens|
Air Pollution Control Advantages | Filtration & Separation Advantages | Petrochemical Components Advantages | Refractory Armouring Advantages |
Wire Mesh Conveyor Belts Advantages |